Bambu Lab PETG-CF-Violet Purple 1Kg Filament

1.720,20 TL
1.720,20 TL


Bambu PETG-CF is a composite material consisting of PETG and carbon fiber. The new formula greatly improved printing quality by reducing nozzle clogging and clumping compared to traditional PETG. With the addition of carbon fiber, Bambu PETG-CF offers improved strength while maintaining good toughness and a shiny look. It is an ideal material for drone parts, racing models, and various functional parts that require both high performance, especially impact strength, and a sleek appearance.


Less clumping and stringing

Bambu PETG-CF is improved with a modified formula that specifically addresses the issue of clumping and sticking to nozzle during PETG printing.



Premium print surface

Carbon fiber brings advanced texture to the print surface, while retaining the shine of PETG itself.


Carbon Fiber Texture

Carbon fiber brings soft reflection, minimal layer lines and a unique delicate texture.



Shiny Finish

Different from PLA-CF's matte finish, PETG-CF offers a shiny finish and thus one more choice.

petg cf


Strong XY Performance

The addition of carbon fiber also significantly enhances the XY strength of PETG without sacrificing layer bonding.


Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

Filament TypeCarbon Fiber InfillCarbon Fiber Infill
Hotend CompatibilityHardened Steel (0.4, 0.6, 0.8 mm)Hardened Steel (0.4, 0.6, 0.8 mm)
Build Plate CompatibilityCool Plate, High Temperature Plate, Textured PEI PlateEngineering Plate, High Temperature Plate, Textuerd PEI Plate
AMS CompatibilityYesYes
Print Speed<250 mm/s<200 mm/s
Toughness (Impact Strength - XY)23.2 kJ/m²41.2 kJ/m²
Strength (Bending Strength - XY)89 MPa70 MPa
Stiffness (Bending Modulus - XY)3950 MPa2910 MPa
Layer Adhesion (Impact Strength - Z)7.8 kJ/m²10.7 kJ/m²
Heat Resistant(HDT, 0.45 MPa)55 °C74 °C


High Flexibility

Compared to other carbon fiber materials, Bambu PETG-CF exhibits exceptional toughness

and is less prone to fracture under external stress and impact.



Accessory Compatibility

RecommendedNot Recommended
Build PlateEngineering Plate, High Temperature Plate or Textured PEI PlateCool Plate
HotendHardened Steel Nozzle (0.4 / 0.6 / 0.8 mm)Stainless Steel Nozzle (0.2 / 0.4 mm)
GlueBambu Liquid Glue
Glue Stick


PETG-CF Hex Code Table

ColorHex CodeDisplay
Brick Red#9f332a
Violet Purple#583061
Indigo Blue#324585
Malachite Green#16b08e
Titan Gray#565656

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.



Recommended Printing Settings
Drying Settings (Blast Drying Oven)65 °C,8 h
Printing and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)
Nozzle Temperature240 - 270 °C
Bed Temperature (with Glue)65 - 75 °C
Printing Speed< 200 mm/s
Physical Properties
Density1.25 g/cm³
Vicat Softening Temperature85 °C
Heat Deflection Temperature74 °C
Melting Temperature225 °C
Melt Index19.3 ± 2.4 g/10 min
Mechanical Properties
Tensile Strength35 ± 5 MPa
Breaking Elongation Rate10.4 ± 0.6 %
Bending Modulus2910 ± 260 MPa
Bending Strength70 ± 5 MPa
Impact Strength41.2 ± 2.6 kJ/m²

Printing Tips

• Bambu PETG-CF needs proper drying before printing. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• To get stronger Z-adhesion, please set a higher infill density, and do not use an open-frame printer or set too large fan percentages to avoid over cooling.

• To get shinier looks, set lower speeds and relatively higher temperatures.

What's in the Box


Filament with Spool*1 & Desiccant*1


Filament Label*1



T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.