x
Menü

Liquid Glue for Build Plate ( PLA/ABS/PETG )

1.093,16 TL + KDV
Overview: The Bambu Lab Liquid Glue is an adhesive specially developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on appropriate surfaces, including the Cool Plate, High-Temperature Plate, and Textured PEI Plate. When using Bambu Lab Liquid Glue, constant adhesion is maintained without worrying about models falling off or warping.
Features:
1. Excellent adhesion: avoid printing failures by ensuring that the models adhere perfectly to the print surface. Bambu Lab Liquid Glue also makes it easier to remove prints from the plate when finished.
2. The Bambu Lab Liquid Glue can be cleaned easily from the print surface and from models. Compared with solid glue, liquid glue for build plate will leave less residue on the printed model and is easier to clean up.
3. Compared with solid glue sticks, Bambu Lab Liquid Glue is easier to apply uniformly over the build surface.
4. The ingredients are environmentally friendly and harmless to the human body, with lower odor compared to other glues
Recommended Settings
 
MaterialHotbed Temperature
PLA40~60°C
ABS90°C~100°C
PETG60~80°C
PET80~100°C
TPU30~45°C
ASA90~100°C
Instructions
Apply pressure to the applicator head to open the internal valve; then, spread glue evenly over the print area. After printing, simply clean the build plate and the bottom of the model with water.
Caution
1. Suitable for filaments such as PLA, PETG, PET, ABS, ASA, TPU.
2. To ensure maximum effect, multiple glue applications are not recommended.
3. Do not squeeze the bottle too hard.
4. If the adhesion to some filament is not enough, please increase the temperature of the hotbed appropriately.
Liquid Glue for Build Plate Technical Specifications
Working life100 times(coat the full plate)Package size30*30*139.5 mm
Package volume60 mLPackage weight80 g
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.