x
Menü

Bambu Lab PETG Basic-Blue Gray 1Kg Filament

1.355,31 TL
1.355,31 TL

Bambu PETG Basic

Known for impact and water resistance, high flexibility, strong layer adhesion, Bambu PETG Basic is ideal for printing tools (vises, tensioners, bag clips), toys (frisbees, boomerangs), water containers (bottles, watering cans), and outdoor items (planter pots, bottle cages) that require long-term exposure and withstanding impacts.

 

silk filament

Less oozing, stringing and clumping

Improved with a modified formula, Bambu PETG Basic reduces clumping, oozing, and stringing issues during printing.

petg basic

 

Excellent Light transmittance

With exceptional light transmittance, Bambu PETG Basic can achieve translucent or even transparent looks with particular printing settings.

petg basic

*Please note that the transparency of the prints may vary depending on factors such as size and structure, as well as printing parameters (including speed, nozzle temperature, and infill density). Learn more about Printing tips for transparent PETG.

 

 

Experience superior toughness and impact resistance

An upgrade from regular PLA materials for high flexibility and excellent impact resistance.

Weight: 1kg

 

Print outdoor models with ease

The waterproof and weather-resistant solution for your garden decor and furniture needs.

petg basic

 

 

Accessory Compatibility

RecommendedNot Recommended
Build PlateEngineering Plate, High Temperature Plate, Textured PEI PlateCool Plate
HotendAll size/Material/
GlueBambu Liquid Glue
Glue Stick
/

 

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

PLA BasicPETG BasicABS
Benefits
  • High speed printing
  • Fine and smooth finish
  • Beginner-friendly
  • Eco-friendly
  • High flexibility & impact resistance
  • Long-term durability
  • Strong layer adhesion
  • Water resistance
  • High speed printing
  • Excellent freezing resistance
  • Heat resistance
  • Water resistance
Drawbacks
  • Relatively less toughness
  • Occasional oozing or clumping
  • Relatively low speed printing
  • Release pungent and unpleasant odor during printing
  • Prone to warping

PETG Basic Hex Code Table

ColorHex CodeDisplay
White#FFFFFF
Transparent/
Nature#F9F7F2
Gray#9EA2A2
Blue Gray#688197
Gold#B28B33
Red#D6001C
Orange#FF671F
Yellow#FCE300
Lime Green#7CD82B
Green#009639
Lake Blue#0069B1
Blue#001489
Purple#9E007E
Black#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid

 

Recommended Printing Settings
Drying Settings (Blast Drying Oven)65 °C,8 h
Printing and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)
Nozzle Temperature240 - 270 °C
Bed Temperature (with Glue)65 - 75 °C
Printing Speed< 200 mm/s
Physical Properties
Density1.25 g/cm³
Vicat Softening Temperature78 °C
Heat Deflection Temperature69 °C
Melting Temperature225 °C
Melt Index18.6 ± 2.2 g/10 min
Mechanical Properties
Tensile Strength32 ± 4 MPa
Breaking Elongation Rate11.2 ± 0.8 %
Bending Modulus1670 ± 120 MPa
Bending Strength65 ± 4 MPa
Impact Strength52.7 ± 2.4 kJ/m²

Printing Tips

• Bambu PETG Basic is prone to string, oozing or sticking to nozzle when it gets wet. Drying conditions: 65℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• Due to the transparent properties of the filament, Lidar Extrusion Calibration can be affected when printing Transparent PETG. 

• Check Transparent PETG printing tips for recommended settings.

• To get shinier looks, set lower speeds and relatively higher temperatures. 

What's in the Box

图片加载失败文案

Filament with Spool*1 & Desiccant*1

petg basic lable

Filament Label*1

图片加载失败文案

Package*1

reusable spool

T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.