x
Menü

Bambu Lab Support for PLA-Black 0.5Kg Filament

1.829,91 TL
1.829,91 TL
图片加载失败文案

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案

Recommended Printing Settings
Drying Settings (Blast Drying Oven)55 °C, 8 h
Printing and Keeping Container's Humidity< 20% RH (Sealed, with Desiccant)
Nozzle Temperature220 - 230 °C
Bed Temperature (with Glue)35 - 45 °C
Printing Speed< 200 mm/s
Physical Properties
Density1.22 g/cm³
Vicat Softening TemperatureN / A
Heat Deflection TemperatureN / A
Melting Temperature190 °C
Melt Index6.4 ± 1.2 g/10 min
Mechanical Properties
Tensile StrengthN / A
Breaking Elongation RateN / A
Bending ModulusN / A
Bending StrengthN / A
Impact StrengthN / A

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

What's in the Box

图片加载失败文案

Filament with Spool*1 & Desiccant*1

图片加载失败文案

Filament Label*1

图片加载失败文案

Package*1

Attribute Comparision

Support for PLASupport for PA/PET
ColorWhite & BlackGreen
Nozzle Temperature210-230°C270-290°C
Bed Temperature35-45°C80-100°C
Print Speed<200mm/s<100mm/s
Water SolubleNoNo
Recommended forPLAPA6-CF,PAHT-CF,PA-CF, PA-GF, PET-CF
Cannot be used withPA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASAPLA, ABS, PETG, TPU, ASA

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.