x
Menü

Complete hotend assembly with hardened steel nozzle -0.6mm For: P1P,P1S

2.375,90 TL + KDV
KDV Dahil: 2.851,07 TL

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

图片加载失败文案

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments
High resolution on the horizontal print surface

图片加载失败文案

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

图片加载失败文案

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.



Filament Compatibility

Material0.2 mm Nozzle0.4 mm Nozzle0.6 mm Nozzle0.8 mm NozzleHardened Steel Required?
General PLAYESYESYESYESOptional
PLA Sparkle*NOYESYESYESOptional
PLA Marble*NOYESYESYESOptional
Wood/Rock/Metal-filled PLA*NOYESYESYESOptional
PETGYESYESYESYESOptional
PVAYESYESYESYESOptional
ABSYESYESYESYESOptional
ASAYESYESYESYESOptional
PCYESYESYESYESOptional
PA*NOYESYESYESOptional
TPU*NOYESYESYESOptional
Bambu PLA-CF*NO*Highly
Recommended
YESYES*Required
Bambu PETG-CF*NO*Highly
Recommended
YESYES*Required
Bambu PAHT-CF*NOYES*Highly
Recommended
YES*Required
Bambu PET-CF*NOYES*Highly
Recommended
YES*Required
CF/GF Filaments from other brands*NONot RecommendedYESYES*Required

[*Note]
  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.
Learn more about filament compatibility on Bambu Lab Wiki.


Configuration of Bambu Hotend

图片加载失败文案

If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.

Learn more about replacing the complete hotend assembly on Bambu Lab Wiki.

In the Box

- Complete Hotend Assembly - P1 Series
- M3-14 Step Screws * 2

Compatibility

P1 Series Exclusive


Product Specifications

Max. Printing Temp.300 ℃Length47.3 mm
Packaging Weight40 gPackaging Size190*70*50 mm
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.