Overview: The Bambu High-Temperature Sheet (Smooth PEI) is a sheet with an adhesive side for replacing the sheet on your High-Temperature Plate.
Compatibility: X1 Series, P1P
Note:
The Bambu High-Temperature sheet is easy to replace and install.
- After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.
- You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.
- You can also use detergent and water to clean the surface.
It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.
How to print your Film Sticking Fixture？
- Bambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files!
Recommended settings for Bambu High-Temperature Plate
These are some recommendations for settings to get the best results while using the Bambu High-Temperature Plate. Please note that these settings are just a recommendation, and other slicer settings might need to be adjusted based on the printed model and the filament requirements.
Material | Hotbed temperature | Glue Stick Required? | Upper Glass Cover Plate Removed? |
PLA/PLA-CF/PLA-GF | 45℃~60℃ | Recommended | Yes |
ABS | 90℃~100℃ | Recommended | No |
PETG | 80℃ | Yes | Yes |
TPU | 35℃ | Recommended | Yes |
ASA | 90℃~100℃ | Recommended | No |
PVA | 45℃~60℃ | Recommended | Yes |
PC/PC-CF | 100℃~110℃ | Yes | No |
PA/PA-CF | 100℃~110℃ | Yes | No |
